Bullnose Garage – STL File
https://bullnosegarage.com

FILE NAME:
BNG Radio Bezel

DESIGNER:
Ed Zenisek
Bullnose Garage

DESCRIPTION:
A faceplate designed to fit over the dash radio bezel in Bullnose Era Trucks. Depending on your trim level, it may need some modification, but the shape and proportions should be correct. There is a trough in the back designed to key into the raised lip around the radio area.  This is designed so you can completely cut out the middle portion of the bezel and place a single DIN with a shelf, a single Din with a CB, or a double din radio. You'll need to cut the holes yourself based on the configuration you want.

VEHICLE FITMENT:
1980 - 86 Ford F-150 and Bronco

RECOMMENDED MATERIAL:
ASA

PRINT NOTES:
Designed to take 6 M3 screws to screw into a backplate of your own design.

HARDWARE / ASSEMBLY:
[List required hardware, inserts, magnets, etc. or "None"]


DISCLAIMERS:
• Designed and tested on my own vehicle.
• Measure and verify fitment before final installation.
• Automotive environments involve heat, vibration, and UV exposure.

LICENSE:
See LICENSE.txt included with this download.